Ключевые слова: magnets, design, design parameters, HTS, REBCO, tapes, winding techniques, quench detection, current-voltage characteristics, experimental results
Ключевые слова: LTS, NbTi, cable-in-conduit conductor, heat transfer, thermal conductivity, coils toroidal, design parameters, Nb3Al, cables, ITER, modeling, numerical analysis
Ключевые слова: ITER, cable-in-conduit conductor, heat transfer, modeling, thermal conductivity, LTS, NbTi, Nb3Sn, strands, coils toroidal, numerical analysis
Ключевые слова: fusion magnets, HTS, REBCO, tapes, stacked blocks, joints, twisting, bending radius, joint resistances, test results
Ключевые слова: power equipment, FCL resistive, HTS, YBCO, current limiting characteristics, recovery characteristics, quench, measurement setup
Ключевые слова: rotating machines, motors, HTS, YBCO, bulk, pulsed operation, fabrication, trapped field distribution, flux density, time evolution, experimental results
Hu J., Chen D., Zhang X., Hu Y., Li P., Tao J., Yang L., Pan M., Peng J., Zhang Q., Qiu W., Huang D., Ji M., Sun K.
Ding H., Li G., Yan L., Liu Z., Lu L., Yang G., Zhang Q., Zhao J., Qiu X., Gu G., Yang F., Qian T., Zhong Y., Tang C., Shen J., Gan Y., Phan G.N., Sui Q.
Ключевые слова: Bi2212, single crystals, doping, annealing process, phase diagram, X-ray diffraction, microstructure, resistance, Hall effect, fabrication, experimental results
Jin F., Wang Y., Wang L., Li Y., Zhang L., Huang Y., Huang X., Dai Y., Bai X., Zhao L., Han X., Gao H., Xu S., Cheng Q., Zhang Q., Gu G., Zhou X., Zhou X., Wu Q., Wang N., Dong T., Liao L., Yue M.
Ключевые слова: HTS, Bi2212, bulk, tapes, environmental impact, degradation studies, Raman spectroscopy, resistivity, temperature dependence, microstructure
Ключевые слова: HTS, GdBCO, tapes, stacked blocks, magnetic flux concentration, magnetic shielding, modeling, flux density, distribution, numerical analysis
Hu J., Chen D., Zhang X., Hu Y., Li P., Tao J., Yang L., Pan M., Peng J., Zhang Q., Qiu W., Ji M., Sun K.
Ключевые слова: measurement technique, magnetic flux distribution, sensors, HTS, DyBCO, magnetoresistivity, measurement setup, experimental results
Ключевые слова: HTS, REBCO, tapes, coils pancake, Roebel conductors, quench propagation, modeling
Ключевые слова: renewable energy systems, Maglev system, levitation performance, loads, thrust density, bearing magnetic, modeling, numerical analysis
Ключевые слова: pnictides, thin films, doping effect, pinning arrays artificial, X-ray diffraction, microstructure, nanoscaled effects, nanorods, resistivity, upper critical fields, irreversibility fields, critical caracteristics, Jc/B curves, critical current density, angular dependence, pinning force, magnetic field dependence, experimental results
Ключевые слова: HTS, YBCO, coated conductors, Roebel conductors, coils pancake, operational performance, quench properties, winding techniques, impregnation, critical caracteristics, current-voltage characteristics, resistance, voltage, strands, hot spots, temperature rise , critical current, temperature dependence, contact characteristics, test results
Ключевые слова: HTS, YBCO, substrate Hastelloy, CVD process, laser application, double-side structures, buffer layers, X-ray diffraction, texture, microstructure, fabrication
Ключевые слова: HTS, YBCO, bulk, vibration, levitation performance, suspension, experimental results, bearing magnetic
Ключевые слова: cryogenic systems, helium sub-cooled, Tokamak, compression, cryogenic pumps, design, design parameters
Ключевые слова: cryogenic systems, compression, refrigerator, status, Tokamak, cooling technology, helium sub-cooled
Ключевые слова: HTS, Bi2223/Ag, coils insert, design parameters, ac losses, temperature dependence, LTS, NbTi, conduction cooled systems, numerical analysis
Ключевые слова: oxypnictides, tapes, fabrication, critical caracteristics, PIT process, ex-situ process, Jc/B curves, susceptibility, milling process
Ключевые слова: pnictides, composites, sheath, wires multifilamentary, microstructure, critical caracteristics, tapes multifilamentary, PIT process, wires round, mechanical properties, hardness, critical current density, Jc/B curves, transport currents, resistive transition, resistivity, temperature dependence
Awaji S., Watanabe K., Yuan P., Zhang X., Ma Y., Wang D., Dong C., Tamegai T., Tsuchiya Y., Yao C., Zhang Q., Lin H., Tang S.
Ключевые слова: pnictides, wires, tapes, critical caracteristics, Jc/B curves, experimental results
Ключевые слова: pnictides, wires, tapes, review, PIT process, transport currents, magnetic field dependence
Sun Y., Awaji S., Watanabe K., Zhang X., Ma Y., Wang C., Wang D., Tamegai T., Tsuchiya Y., Yao C., Zhang Q., Lin H.
Ключевые слова: cryogenic systems, magnets, refrigerator, nitrogen liquid , pressure effect
Li X., Wang H., Zhao B., Yan L., Chen S., Lei Y., Yang Z., Wang Q., Dai Y., Song S., Wang C., Cao Z., Hu X., Zhang H., Liu J., Xu G., Liu H., Zhang Q., Cheng J., Zhao S.
Ключевые слова: power equipment, SMES, LTG process, NbTi, fabrication, test results, current leads, HTS, Bi2223, coils solenoidal, design parameters, quench protection
© Copyright 2006-2012. Использование материалов сайта возможно только с обязательной ссылкой на сайт.
Свои замечания и пожелания вы можете направлять по адресу perst@isssph.kiae.ru
Техническая поддержка Alexey, дизайн Teodor.